Don’t worry about forgetting your passwords ever again with the all-new password manager.

Try PureKeep

The newly launched password manager is a secure way to store, share, and generate strong passwords. Try PureKeep!

How to Setup PureVPN PPTP on Linux Fedora

Jun 04, 2020
Sep 16, 2022
Download PDF

Setting up a VPN on your Linux Fedora has never been easier. Just follow the guide and learn how to set up PureVPN on Fedora via PPTP protocol.

Note: PPTP is longer supported on Fedora version 35 and above. The below instructions are valid for Fedora verion below 35.

Things to Consider:

  1. You have a working internet connection
  2. Linux Fedora Supported Device.
  3. A Premium PureVPN account (If you haven’t bought yet click 👉here to buy)
Find your VPN credentials for manual configuration.

To find your VPN credentials log into the PureVPN members area. Click 👉 here to visit member area.

  • Login to the Member area using your PureVPN registered email address and password.
  • From manage account section, go to the Subscriptions tab.
  • On Subscription tab scroll down to be able to view your VPN credentials
  • You will be able to see and copy your VPN credentials.
  • Note down your PureVPN username and click the Eye icon to make your password visible and use it in the manual configuration.
Connect PureVPN manually on Linux Fedora.

To Configure PPTP on Fedora, kindly follow below steps:

  • Click the Settings icon in the upper side panel and then Wired Connected.
Wired Connected
  • Now click Wired Settings
Wired Settings
  • Click + to add a new connection.
Click '+' to add a new connection
  • Click VPN in add Network Connection panel.
Click 'VPN' in add Network Connection panel
  • Then click Point-to-Point Tunneling Protocol (PPTP).
Point-to-Point Tunneling Protocol (PPTP)
  • Do the following:
  • Enter Connection name: New Connection or as per your choice
  • Insert the desired server: Please refer to the server address shared in the above note.
    1. Germany:
    2. Netherlands:
    3. United Kingdom:
    4. United States:
    5. United States:
    6. United States:
    7. United States:
    8. United States:
    9. United States:
    10. Australia:
  • Enter your PureVPN credentials. Here is how you can 👉find your VPN credentials.
  • Click Advanced
  • Check mark the following options:
    1. MS CHAP and MSCHAPv2 only in Authentication methods.
    2. Use Point-to-Point encryption (MPPE)
    3. Allow BSD data compression
    4. Allow Deflate data compression
    5. Use TCP header compression
  • Click OK
PPTP Advanced Options
  • Click Add.
  • Your New Connection can now be seen in the Network list.
New Connection
  • Select New Connection and turn it ON.
turn ON new connection
  • Your dialer is now successfully connected.
dialer is now successfully connected

Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.

No Yes

Comments (0 )