• Our hottest-selling 5-year plan at 89% off is ending tonight at 11:59 PM.

  • Upgrade my plan now ** Few Hours Left **

Don’t miss this last call! We’re saying good-bye to our 89% off hottest selling 5-year plan tonight. Upgrade now!  

How to Setup PureVPN on DrayTek Router

Aug 25, 2016
Dec 01, 2022
6 Comments
Download PDF

Configuring a PureVPN tunnel on your router is a great way to ensure the safety and security of all the devices in your home. This method is especially beneficial if you have devices that don’t have VPN compatibility or you want to protect all the Wi-Fi-connected devices in your home.

Things to Consider:

  1. You have a working internet connection
  2. VPN Supported Router.
  3. A Premium PureVPN account (If you haven’t bought yet click 👉here to buy)
Find your VPN credentials for manual configuration.

To find your VPN credentials log into the PureVPN members area. Click 👉 here to visit member area.

  • Login to the Member area using your PureVPN registered email address and password.
  • From manage account section, go to the Subscriptions tab.
  • On Subscription tab scroll down to be able to view your VPN credentials
  • You will be able to see and copy your VPN credentials.
  • Note down your PureVPN username and click the Eye icon to make your password visible and use it in the manual configuration.
How to connect PureVPN manually on DrayTek Router.
  • To start setting up a VPN on a tp-link router you first have to connect to it. For that, you have to put in your browser the following address: http://192.168.0.1 (If this doesn’t work, please consult your router’s manual to find what is the Default Gateway Address). Enter your router’s username and password and click Login.
  • Select LAN to LAN in the submenu
  • Common Settings
  • Enter your Profile Name
  • Choose Enable this profile
  • Call direction: Choose  Dial-out and keep it on Always on
  • Dial-Out Settings
  • Choose PPTP
  • Insert the desired server: Please refer to the server address shared below.
    1. Germany: de1.pointtoserver.com
    2. Netherlands: nl1.pointtoserver.com
    3. United Kingdom: ukl1.pointtoserver.com
    4. United States: usil1.pointtoserver.com
    5. United States: ustx1.pointtoserver.com
    6. United States: usca1.pointtoserver.com
    7. United States: usfl1.pointtoserver.com
    8. United States: usny1.pointtoserver.com
    9. United States: uswdc1.pointtoserver.com
    10. Australia: au-sd1.pointtoserver.com
  • Enter your PureVPN credentials. Here is how you can 👉find your VPN credentials.
  • PPP Authentication: PAP/CHAP/MS-CHAP/MS-CHAPv2
  • VJ Compression: Off
DrayTek Router VPN Setup
  • TCP/IP Network Settings
    1. Choose Change default route to this VPN tunnel (Only single WAN support)
    2. Lastly, Select OK to complete the process!
Draytek TCP/IP Network Settings
Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.
No Yes

Comments (6 )

Leave a Reply to Rob

6 Comments

  1. Rob says:

    In order to get my 2860 to work I had to do just a few additions to the above:
    1, Go into WAN -> General Setup and disable all the WANS except the one dialing out.
    2, In the LAN-LAN VPN setup you also need to set ROUTE to NAT.

  2. Joe Bridgehouse says:

    Setup as per instructions and set the computer to connect to vleu-am1.pointtoserver.com and everythings OK

  3. PureVPN Team says:

    Hi,

    We are sorry for the inconvenience. Can you kindly join us on 24/7 live chat so we may look into the issue in better way and assist you accordingly.

  4. Jill Jackson says:

    I have tried to set up a draytek 2830 modem router but, like the below comment, although it shows a valid connection on the lan to lan vpn page of the router I cant load any pages. The occasional google search result page but nothing heavier than that. Any thoughts?

  5. Lee Gathercole says:

    Tried this configuration and whilst it looks like there is a VPN connection established, as soon as I try and route any traffic over the VPN nothing happens. Not sure if it’s a DNS issue or a IP config issue, but I have exactly the same config as the screenshots above.

    I have a Virgin Media Hub in Modem Mode, if that helps?

    Thanks