Black Friday Upgrade offer is live! Get 89% off upgrading your PureVPN plan today. Upgrade to 5-year plan now! > Offer valid for existing users only.

Here’s how to setup Kodi VPN on your devices | PureVPN

Dec 22, 2017
Nov 17, 2022
1 Comments
Download PDF

PureVPN is considered one of the Best VPN for Kodi in the industry. With an easy to follow setup and ‘getting-started’ guides and complete accessibility to all the Kodi add-ons from anywhere, you are assured to get the best entertainment experience of your lifetime with PureVPN. Here’s how you can setup Kodi VPN on your devices with PureVPN.

How to setup Kodi on Windows

Setting up Kodi on your Windows 7, 8 or Windows 10 is more easy and straightforward than other operating systems. Here’s how:

  • On your Windows device, launch the PureVPN app for Windows. If you haven’t installed the app yet, see the instructions on installing PureVPN on Windows.
  • Tap on choose location and select the location you want to connect to.
  • Verify that your IP address has been changed.
  • Open Kodi and use it as you normally would. For instructions on installing Kodi on Windows, see here.
Note: Please note that using PureVPN with Kodi is a must since PureVPN will not only give you access to blocked or restricted content and add-ons, it will also keep you protected against threats.
How to setup Kodi on Mac

For Mac lovers, Kodi can be configured on their Mac devices.

Here’s how you can setup Kodi on your Mac:

  • Launch the PureVPN app for Mac. If you haven’t installed the app yet, see the instructions on installing PureVPN on Mac.
  • Click choose locationand double-click on the location of your choice to connect.
  • Verify that your IP address has been changed.
  • Open Kodi and use it as you normally would. For instructions on installing Kodi on Mac, see here.
Note: Please note that using PureVPN with Kodi is a must since PureVPN will not only give you access to blocked or restricted content and add-ons, it will also keep you protected against threats.
How to setup Kodi on Android Phone

You can always enjoy Kodi on your Android-powered devices. All you have to do is follow these simple steps:

  • On your Android device, launch the PureVPN app for Android. If you haven’t installed the app yet, see the instructions on installing PureVPN on Android.
  • Tap on choose location and select the location you want to connect to.
  • Verify that your IP address has been changed.
  • Open Kodi and use it as you normally would. For instructions on installing Kodi on Android, see here.
Note: Please note that using PureVPN with Kodi is a must since PureVPN will not only give you access to blocked or restricted content and add-ons, it will also keep you protected against threats.
How to setup Kodi on iPhone/iOS

Setting up Kodi on your iOS is a simple and easy process that doesn’t take too much of your time. The best part is that the Kodi installation process is same across different iOS devices such as iPhone, iPad, iPod Touch, iPad Mini and iPad Pro:

To enjoy Kodi on your iPhone or any other iOS 9 powered device, you will need to download the following important files:

  • On your iOS device, launch the PureVPN app for iOS. If you haven’t installed the app yet, see the instructions on installing PureVPN on iOS.
  • Tap on choose location and tap on the location of your choice to connect.
  • Verify that your IP address has been changed.
  • Open Kodi and use it as you normally would. For instructions on installing Kodi on iOS, see here.
  • Sometimes you may get an Untrusted Developer error when you open your device. To remove the error, go to the Settings of your device. Tap General and then Device Management. Find your account under the Developer App. Now, Tap Trust account name, and tap Trust again.

You can now enjoy Kodi on your iOS 9 or your iPhone via a Kodi VPN.

Note: Please note that using PureVPN with Kodi is a must since PureVPN will not only give you access to blocked or restricted content and add-ons, it will also keep you protected against threats.
How to setup Kodi on Amazon FireTV & Firestick

The next-generation Amazon Fire Stick is the most powerful media player that enables users to access over 7000 apps, games, movies and your favorite programs from Hulu Plus, Amazon Instant Video and much more.

Please note: No extra configurations are required on Kodi. Please follow this guide to download our app from Amazon Store for FireStick.

With the added muscle from Kodi and this easy-to-follow guide, you will be able to enjoy pure unrestricted streaming without the need for a computer, laptop or other devices.

Note: Please note that using PureVPN with Kodi is a must since PureVPN will not only give you access to blocked or restricted content and add-ons, it will also keep you protected against threats.
How to setup Kodi on Android TV

You can always enjoy Kodi on your Android-powered devices. All you have to do is follow these simple steps:

  • On your Android TV device, launch the PureVPN app for Android TV. If you haven’t installed the app yet, see the instructions on installing PureVPN on Android TV.
  • Tap on choose location and select the location you want to connect to.
  • Verify that your IP address has been changed.
  • Open Kodi and use it as you normally would. For instructions on installing Kodi on Android, see here.
Note: Please note that using PureVPN with Kodi is a must since PureVPN will not only give you access to blocked or restricted content and add-ons, it will also keep you protected against threats.
How to use PureVPN Kodi Addon on Raspberry PI (OpenELEC) - Krypton
  • Download the Installation File for PureVPN Kodi Add-on
  • Open browser and go to https://s3.amazonaws.com/purevpn-dialer-assets/kodi/app/service.purevpn.monitor-1.8.0.zip
Open browser and go to “https://s3.amazonaws.com/purevpn-dialer-assets/kodi/app/service.purevpn.monitor-1.8.0.zip”
  • A download pop up will appear. Check on Save File and click OK to download the installation file.
A download pop up will appear. Check on “Save File” and click “OK” to download the installation file.
  • Locate the downloaded installation file.
Locate the downloaded installation file.
  • Place the downloaded installation zip file service.purevpn.monitor-1.3.0.zip in a USB drive and plug in the USB drive  in a OpenElec Kodi Box.
  • Launch KODI and install PureVPN Addon for KODI
  • Navigate to Home Page and click Add-ons.
Navigate to Home Page and click “Add-ons”.
  • Click Files icon.
Click on “Files” icon.
  • Click Install from zip file.
Click on “Install from zip file”.
  • Navigate to the USB device where installation file service.purevpn.monitor-1.3.0.zip is placed.
  • Just click once the downloaded file that is Service.purevpn.monitor-1.3.0.zip and your add-on will be installed.
  • Configuring and Setting up Installed PureVPN Add-on.
  • Navigate to Add-ons tab home page.
  • Now, click PureVPN Monitor OpenVPN.
  • Click Add-on Settings.
  • In the VPN Configuration tab Click on Username and Password tab to enter your credentials.
  • You can also choose between protocols to display (UDP, TCP or both) from the Protocol tab on VPN Configuration tab.
  • After doing all the settings click OK.
  • Explore the Add-on
  • Click Change or disconnect VPN Connection.
  • Now you can choose from the list of available countries and protocols.
  • Just click once desired location and protocol, and wait for the connection to establish.
  • To check your current VPN status click Display VPN Status.
  • To disconnect VPN click Change or disconnect VPN Connection tab and click Disconnect.
How to use PureVPN Kodi Addon on Raspberry PI (OpenELEC) - Isengard
  • Download the Installation File for PureVPN Kodi Add-on
  • Open browser and go to https://s3.amazonaws.com/purevpn-dialer-assets/kodi/app/service.purevpn.monitor-1.8.0.zip
  • A download pop up will appear. Check Save File and click OK to download the installation file.
  • Locate the downloaded installation file.
  • Place the downloaded installation zip file Service.purevpn.monitor-1.3.0.zip in a USB drive and plug in the USB drive  in a OpenElec Kodi Box.
  • Start the  KODI Box and install PureVPN Addon for KODI.
  • Click SYSTEM tab.
  • Click Add-ons.
  • Click Install from zip file.
  • Navigate to the USB device where installation file is placed.
  • Just click once Service.purevpn.monitor-1.3.0.zip and your add-on will be installed.
  • Configuring and Setting up Installed PureVPN Add-on.
  • Go to Home Page and click PROGRAMS tab.
  • Now click PureVPN Monitor OpenVPN.
  • Click  Add-on Settings.
  • In the VPN Configuration tab Click on Username and Password tab to enter your credentials.
  • You can also choose between protocols to display (UDP, TCP or both)
  • After doing all the settings click OK.
  • Explore the Add-on
  • Click Change or disconnect VPN Connection.
  • Now you can choose from the list of available countries and protocols.
  • Just click ONCE on desired location and protocol, and wait for the connection to establish.
  • To check your current VPN status click Display VPN Status.
  • To disconnect VPN click Change or disconnect VPN Connection tab and click Disconnect.
How to use PureVPN Kodi Addon on Linux (Debian) - Krypton
  • Download the Installation File for PureVPN Kodi Add-on
  • Open browser and go to https://s3.amazonaws.com/purevpn-dialer-assets/kodi/app/service.purevpn.monitor-1.8.0.zip
  • A download pop up will appear. Check Save File and click OK to download the installation file.
  • Locate the downloaded installation file.
  • Install OpenVPN, KODI and other dependencies (Ignore if already Installed)
  • Open Terminal and type these commands:
  • sudo apt-get update (to update)
  • sudo apt-get install openvpn (to install openvpn)
  • sudo apt-get install kodi (to install kodi)
  • Launch KODI and install PureVPN Addon for KODI
  • Open Terminal and type sudo kodi to launch KODI
  • Navigate to Home Page and click Add-ons.
  • Click Files icon.
  • Click Install from zip file.
  • Navigate to folder where installation service.purevpn.monitor-1.3.0.zip file is downloaded.
  • Just click once the downloaded file that is Service.purevpn.monitor-1.3.0.zip and your add-on will be installed.
  • Configuring and Setting up Installed PureVPN Add-on.
  • Navigate to Add-ons tab home page.
  • Now click PureVPN Monitor OpenVPN.
  • Click Add-on Settings.
  • In the VPN Configuration tab Click Username and Password tab to enter your credentials.
  • You can also choose between protocols to display (UDP, TCP or both) from the Protocol tab VPN Configuration tab.
  • After doing all the settings click OK.
  • Explore the Add-on
  • Click Change or disconnect VPN Connection.
  • Now you can choose from the list of available countries and protocols.
  • Just click once desired location and protocol and wait for the connection to establish.
  • To check your current VPN status click on Display VPN Status.
  • To disconnect VPN click Change or disconnect VPN Connection tab and click Disconnect.
How to use PureVPN Kodi Addon on Linux (Debian) - Isengard
  • Download the Installation File for PureVPN Kodi Add-on
  • Open browser and go to https://s3.amazonaws.com/purevpn-dialer-assets/kodi/app/service.purevpn.monitor-1.8.0.zip
  • A download pop up will appear. Check Save File and click OK to download the installation file.
  • Locate the downloaded installation file.
  • Install OpenVPN, KODI and other dependencies (Ignore if already Installed)
  • Open Terminal and type these commands:
  • sudo apt-get update (to update)
  • sudo apt-get install openvpn (to install openvpn).
  • sudo apt-get install kodi (to install kodi)
  • Launch KODI and install PureVPN Add-on for KODI
  • Open Terminal and type sudo kodi to launch KODI
  • Click SYSTEM tab.
  • Click Add-ons.
  • Click Install from zip file.
  • Navigate to folder where installation file is downloaded.
  • Just click once Service.purevpn.monitor-1.3.0.zip and your add-on will be installed.
  • Configuring and Setting up Installed PureVPN Add-on.
  • Go to Home Page and click PROGRAMS tab.
  • Now, click PureVPN Monitor OpenVPN.
  • Click Add-on Settings.
  • In the VPN Configuration tab Click Username and Password tab to enter your credentials.
  • You can also choose between protocols to display (UDP, TCP or both)
  • After doing all the settings click OK.
  • Explore the Add-on
  • Click Change or disconnect VPN Connection.
  • Now you can choose from the list of available countries and protocols.
  • Just click once desired location and protocol, and wait for the connection to establish.
  • To check your current VPN status click Display VPN Status.
  • To disconnect VPN click the Change or disconnect VPN Connection tab and click Disconnect.
Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.

How helpful did you find this answer?

Comments (1 )

1 Comment

  1. Great delіvery. Solid argumеnts. Keep ᥙp the go᧐d spirit.

    additional reading : Here’s How To Password Ρrotect Foldеr Lіke A
    Pгofessional