Introducing PureSquare – for security beyond VPNs

Visit our website

Don’t worry about forgetting your passwords ever again with the all-new password manager. Try PureKeep

How to setup PureVPN PPTP on D-Link DIR-921 Router

Jun 10, 2020
Mar 28, 2023
0 Comments
Download PDF

Configuring a PureVPN tunnel on your router is a great way to ensure the safety and security of all the devices in your home. This method is especially beneficial if you have devices that don’t have VPN compatibility or you want to protect all the Wi-Fi-connected devices in your home.

Don’t worry if you can’t set up PureVPN on your device directly. You can now do it by setting up the VPN on the router first. If you are using a D-Link DIR-912 router, here’s how you can configure PureVPN on it using the PPTP protocol.

Things to Consider:

  1. You have a working internet connection
  2. VPN Supported Router.
  3. A Premium PureVPN account (If you haven’t bought yet click 👉here to buy)
Find your VPN credentials for manual configuration.

To find your VPN credentials log into the PureVPN member area. Click 👉 here to visit member area.

  • Login to the Member area using your PureVPN registered email address and password.
  • On subscriptions tab scroll down to be able to view your VPN credentials.
  • You will be able to see and copy your VPN credentials.
  • Note down your PureVPN username and click on Eye icon to make your password visible and use it in the manual configuration.
How to connect PureVPN manually on D-Link DIR-921.
  • To start setting up a VPN on a D-Link router you first have to connect to it. For that you have to put in your browser the following address: http://192.168.0.1 (If this doesn’t work, please consult your router’s manual to find what is the Default Gateway Address). Enter your router’s username and password and click Log In.
Enter your router’s username and password and click ‘Log In’.
  • Once logged in, select the Internet option from the list of options at the top.
 Once logged in, select the ‘Internet’ option from the list of options at the top.
  • You will be redirected to WAN Service Configuration, Under the Internet Connection Type set the Internet Connection to PPTP(Username/Password) from the drop-down menu.
You will be re-directed to WAN Service Configuration, Under the ‘Internet Connection Type’ set the Internet Connection to “PPTP(Username/Password)” from the drop-down menu.
  • Now enter the following information:
  • Address Mode: Dynamic IP
  • PPTP Server IP Address: (Please refer to the server addresses shared below). Click 👉 here on how to convert server address into IP address)
    1. Germany: de1.pointtoserver.com
    2. Netherlands: nl1.pointtoserver.com
    3. United Kingdom: ukl1.pointtoserver.com
    4. United States: usil1.pointtoserver.com
    5. United States: ustx1.pointtoserver.com
    6. United States: usca1.pointtoserver.com
    7. United States: usfl1.pointtoserver.com
    8. United States: usny1.pointtoserver.com
    9. United States: uswdc1.pointtoserver.com
    10. Australia: au-sd1.pointtoserver.com
  • Enter your PureVPN credentials. Here is how you can 👉find your VPN credentials.
  • Verify Password: (Enter the PureVPN password)
  • Reconnect Mode: Always On
  • NAT Disable: Uncheck
  • Once you have entered all the information, click the Save Settings button to activate the VPN connection.
Once you have entered all the information, click the “Save Settings” button to activate the VPN connection.

PureVPN is successfully connected now on your D-Link DIR-921 4G LTE router.

Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.

How helpful did you find this answer?

Comments (0 )