- To start setting up a VPN on a D-Link router you first have to connect to it. For that you have to put in your browser the following address: http://192.168.0.1 (If this doesnt work, please consult your routers manual to find what is the Default Gateway Address). Enter your routers password and click Log In.
- Once logged in, go to the Settings option and select Internet from the drop-down list.
- Under the My Internet Connection is set the Internet Connection to PPTP from the drop-down menu.
Insert the following information.
- Insert the desired server: Please refer to the server address shared below.
- Germany: de1.pointtoserver.com
- Netherlands: nl1.pointtoserver.com
- United Kingdom: ukl1.pointtoserver.com
- United States: usil1.pointtoserver.com
- United States: ustx1.pointtoserver.com
- United States: usca1.pointtoserver.com
- United States: usfl1.pointtoserver.com
- United States: usny1.pointtoserver.com
- United States: uswdc1.pointtoserver.com
- Australia: au-sd1.pointtoserver.com
- Please check this 👉 link on how to convert server address into IP address
- Enter your PureVPN credentials. Here is how you can 👉find your VPN credentials.
- Reconnect Mode: Always On
- Address Mode: Dynamic IP
- Primary DNS Server: 8.8.8.8
- Secondary DNS Server: 8.8.4.4
- Click Save button to connect to VPN. You will be connected shortly.
On some models of D-Link, the router may reboot. If it does so, re-login and goes to Status and click the Connect button.
To disconnect from the VPN, go back to the D-Link administration page and click Disconnect.
If you want to use the internet without a VPN connection, go to Internet > Settings. Then, next to My Internet Connection is: select Dynamic IP (DHCP) and Save settings.
You are done!!