• Our hottest-selling 5-year plan at 89% off is ending tonight at 11:59 PM.

  • Upgrade my plan now ** Few Hours Left **

Donโ€™t miss this last call! Weโ€™re saying good-bye to our 89% off hottest selling 5-year plan tonight. Upgrade now!  

How to Setup Openvpn on Mac Tunnel Blick

Jul 07, 2014
Dec 01, 2022
5 Comments
Download PDF

Things to Consider:

  1. You have a working internet connection
  2. Mac Supported Device.
  3. A Premium PureVPN account (If you havenโ€™t bought yet click ๐Ÿ‘‰here to buy)
Note: Dedicated IP addon can be only be connected with Ras protocol i.e PPTP/L2TP/SSTP.
Find your VPN credentials for manual configuration.

To find your VPN credentials log into the PureVPN members area. Click ๐Ÿ‘‰ here to visit member area.

  • Login to the Member area using your PureVPN registered email address and password.
  • From manage account section, go to the Subscriptions tab.
  • On Subscription tab scroll down to be able to view your VPN credentials
  • You will be able to see and copy your VPN credentials.
  • Note down your PureVPN username and click the Eye icon to make your password visible and use it in the manual configuration.
How to connect PureVPN manually on Mac.

In order to configure Tunnel Blick, you need to download Tunnel Blick and OpenVPN Tunnel Blick files.

  • A new dialogue box will pop up, asking you if you are sure you want to open the app. Click Open.
  • You will be asked to enter your Mac password. Enter it and click OK:
  • You can click on the Tunnelblick icon in the status bar and select VPN details.
  • Select I have configuration files.
  • Another notification will pop-up, instructing you how to import configuration files. Click OK.
  • Drag and drop the previously downloaded .ovpn file from your Downloads folder to the Configurations tab in Tunnelblick.
  • A pop-up will appear, asking you if you want to install the configuration profile for your current user only or for all users on your Mac. Select your preferred option.
  • You will be asked to enter your Mac password.
  • Now, you may select the Server from the list and connect.
  • Once you click connect, You will be asked to enter your VPN credentials. Here is how you can find your ๐Ÿ‘‰VPN credentials.
  • Mark check on Save in Keychain.
  • Click OK.
  • If you see Initialization Sequence Completed message. That means you are now Connected.
  • Another way to check the connection status is to click the Open GUI icon on the top.
  • You are Connected now. Enjoy PureVPN!
Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.

How helpful did you find this answer?

Comments (5 )

5 Comments

  1. Jonathan Irons says:

    In the Tunnelblick file with all the servers, there is a folder called TCP and one called UDP. What’s the difference? Does it matter which one I use?

    Thanks

  2. aviweiss says:

    tunnelblick app has been updated and now has the “Reset” found on the main “preferences” panel, not the “Advanced” panel