PureVPN is now Zero-Log Certified by Altius IT, one of the leading independent US-based Auditors. Read More 

How to setup PureVPN on Linux Deepin 15.11

Jan 22, 2020
Jan 22, 2020
0 Comments
Download PDF

By configuring PureVPN on your Deepin 15.11 desktop or laptop, you can enjoy better privacy, security, and freedom online. Here’s how to go about it.

 

PPTPSSTPOpenVPN
1 Click Control Center icon then select the Network option.

2 Click VPN then select Create VPN option to add a VPN connection and select PPTP from the list.

3 Insert the following info:

  • Insert Connection name: PureVPN
  • Insert Gateway: usca.pointtoserver.com (you can use your desired server address here,  in order to see the complete list click here)
  • Insert Username provided by PureVPN
  • Insert Password provided by PureVPN
4 Under VPN PPP option, check the following:

  • Use MPPE: Uncheck
  • Refuse EAP Authentication: Check
  • Refuse PAP Authentication: Check
  • Refuse CHAP Authentication: Check
  • Click Save

5 Under VPN Status to connect to PureVPN, click the newly created VPN connection i.e. PureVPN.

6 You are now connected to PureVPN!

1 Click Control Center icon then select the Network option.

2 Click VPN then select Create VPN option to add a VPN connection and select SSTP from the list.

3 Insert the following info:

  • Insert Connection name: PureVPN
  • Insert Gateway: usca.pointtoserver.com (you can use your desired server address here,  in order to see the complete list click here)
  • Insert Username provided by PureVPN
  • Insert Password provided by PureVPN
  • CA file: blank
  • Ignore Certificate Warnings: Checked
4 Under VPN PPP option, check the following:

  • Use MPPE: Uncheck
  • Refuse EAP Authentication: Check
  • Refuse PAP Authentication: Check
  • Refuse CHAP Authentication: Check
5 Click Save.

6 Under VPN Status to connect to PureVPN, click the newly created VPN connection i.e. PureVPN.

7 You are now connected to PureVPN!

1 Firstly, go to your desired web browser and download PureVPN OpenVPN configuration files and extract them.

2 Click Control Center icon then select the Network option.

3 Click VPN then select Create VPN option to add a VPN connection and select OpenVPN from the list.

4 Insert the following info:

  • Insert Name: PureVPN
  • Insert Gateway: de2-ovpn-udp.pointtoserver.com (you can use your desired server address here,  in order to see the complete list click here)
  • Auth Type: Password
  • Insert Username provided by PureVPN
  • Insert Password provided by PureVPN
  • CA Cert: Click on dotted icon () and upload the ‘ca.crt.crt’ file from the downloaded OpenVPN folder.
5 Under VPN Advanced option, check the following:

  • Customize Gateway Port: Check
  • Gateway Port: 53 (for UDP)/ 80 (for TCP)
  • Use LZO Data Compression: Check
  • Use TCP Connection: Check

Note: Enable Use TCP connection only if you’re connecting via OpenVPN TCP protocol.

6 Under the ‘VPN Security’ option, check the following:

  • Cipher: AES-256-CBC
  • HMAC Auth: SHA-1
7 Under the ‘VPN TLS Authentication’ option, check the following:

  • Key File: Click on dotted icon () and upload the ‘Wdc.key’ file from the downloaded OpenVPN folder.
  • Customize Key Direction: Check
  • Key Direction: 1
8 Click Save.

9 Under VPN Status to connect to PureVPN, click the newly created VPN connection i.e. PureVPN.

10 You are now connected to PureVPN!

How helpful did you find this answer?

Comments (0 )