- Login to your router. Click PPP and select PPTP client.
- Enter PureVPN-PPTP in the Name section.
- Click Dial Out and enter the server address you want to connect with. (Please refer to the server address shared below).
- Germany: de1.pointtoserver.com
- Netherlands: nl1.pointtoserver.com
- United Kingdom: ukl1.pointtoserver.com
- United States: usil1.pointtoserver.com
- United States: ustx1.pointtoserver.com
- United States: usca1.pointtoserver.com
- United States: usfl1.pointtoserver.com
- United States: usny1.pointtoserver.com
- United States: uswdc1.pointtoserver.com
- Australia: au-sd1.pointtoserver.com
- Username and Password: Enter your VPN credentials. Here is how you can find your VPN credentials.
- Fields respectively. Check-mark the dial on demand and add default route options. Click Apply/ OK to save your settings.
Note: If you face any problem in connecting VPN then uncheck Add Default Route.
- Now click IP from the main menu and select Firewall.
- Now choose the NAT tab and add a new NAT rule. choose scrnat from chain and PureVPN-PPTP from the Out Interface list.
- Now, click the Action tab and select masquerade from the drop-down list. Click Apply/ OK to save the settings.
- Now select the Mangle tab and add a new rule. In General, tab, choose prerouting from the chain list. Then enter the IP address you wish to connect with or the range of the IP addresses you want to route through the VPN tunnel in the Src Address field.
- Now choose the Action tab and choose mark routing from the Action list. Type PureVPN-PPTP in the New Routing Mark field and save the settings.
- Click IP from the main menu and choose Routes.
- Now click the + icon to add a new route. Enter 0.0.0.0/0 in the Dst. Address, choose PureVPN-PPTP from Gateway and then choose PureVPN-PPTP from the Routing Mark. Click Apply/ OK to save your settings.
- Now click IP from the main menu and select DNS.
- Check-mark Allow Remote Requests and save the settings.
- Click IP from the main menu and select DHCP Server.
- Now enter 208.67.222.222, 208.67.220.220 in DNS Servers fields. Click Apply/ OK to save your settings.
- Now click Interface from the main menu, open the PureVPN-PPTP interface, and enable the connection from the status tab.
That’s about it. Enjoy total unlimited internet freedom with PureVPN!