Black Friday Upgrade Offer! Upgrade your PureVPN’s plan at 90% OFF. The offer is valid for existing users only. Upgrade my plan >

How to Setup PureVPN on Windows Vista SSTP?

Feb 18, 2015
Oct 04, 2021
0 Comments
Download PDF
NOTE
Starting June 15th, 2021, PureVPN will discontinue offering support for PPTP, L2TP, and SSTP protocols on the majority of VPN locations.

However, at the popular request of our users, we will continue to support the following locations for users to connect using PPTP, L2TP, and SSTP protocols:
Germany: de1.pointtoserver.com
Netherlands: nl1.pointtoserver.com
United Kingdom: ukl1.pointtoserver.com
United States: usil1.pointtoserver.com
United States: ustx1.pointtoserver.com
United States: usca1.pointtoserver.com
United States: usfl1.pointtoserver.com
United States: usny1.pointtoserver.com
United States: uswdc1.pointtoserver.com
Australia: au-sd1.pointtoserver.com

Things to Consider:

Before you begin, please make sure that:

  • You have a working internet connection
  • Windows Supported Device.
  • A Premium PureVPN account (If you haven’t bought yet click here to buy)
Find your VPN credentials for manual configuration.

  • Once logged in go to Account & Billing section.

  • On Account and Billing section click on drop-down icon

  • Click on Show/Update VPN password

  • Note down your PureVPN username and click on Eye icon to make your password visible and use it in the manual configuration.

How to connect PureVPN manually on Windows Vista.

1 Click on Start and click on “Connect To”

Click on Start and click on "Connect To"

2 Click on “Set up a connection or network”

Click on "Set up a connection or network"

3 Select Connect to a workplace and click “Next”

Select Connect to a workplace and click "Next"

4 Click on “Use my Internet connection (VPN)”

Click on "Use my Internet connection (VPN)"

5 Click on “I’ll set up an Internet connection later”

Click on "I'll set up an Internet connection later"

6 Insert the following info:

  • Insert the desired server: Please refer to the server address shared in the above note.
  • Insert PureVPN SSTP or PureVPN US etc as the Destination name
  • Click on “Allow other people to use this connection”
  • Insert the desired server: Please refer to the server address shared in the above note.
  • Insert PureVPN SSTP or PureVPN US etc as the Destination name
  • Click on “Allow other people to use this connection”

7 Click on “Continue”

Click on "Continue"

8 Select “Don’t connect now; just set it up so I can connect later” then Click “Next

Select "Don't connect now; just set it up so I can connect later" then Click "Next"

9 Insert the following info:

  • Insert your Username and Password provided by PureVPN.
  • Tick “Remember this password”
  • Click on “Create”

Insert your Username and Password provided by PureVPN. Tick "Remember this password" Click on "Create"

10 Click on “Close

Click on "Close"

11 Click on Start and click on Connect To

Click on Start and click on Connect To

12 Right click on PureVPN SSTP connection and select “Properties

Right click on PureVPN SSTP connection and select "Properties"

13 Click on “Continue

Click on "Continue"

14 Insert the following info:

  • Click on “Networking” tab
  • Select “Secure Socket Tunneling Protocol (SSTP)” from drop down menu

Click on “Networking” tab Select "Secure Socket Tunneling Protocol (SSTP)" from drop down menu

15 Insert the following info:

  • Uncheck “Internet Protocol Version 6 (TCP/IPv6)” and “File and Printer Sharing for Microsoft
  • Click on “OK

Uncheck "Internet Protocol Version 6 (TCP/IPv6)" and "File and Printer Sharing for Microsoft" Click on "OK"

16 Click on “Connect

Click on "Connect"

17 Click on “Connect” again

Click on "Connect" again

18 VPN will establish after account verification

VPN will establish after account verification

19 VPN is successfully connected

VPN is successfully connected

20 Select Network as “Public

Select Network as "Public"

21 Click on Close and Enjoy the Freedom!!!!!!!!

 Click on Close and Enjoy the Freedom!!!!!!!!

22 To disconnect VPN. Click on Lan / Wifi icon from system tray and click on “Connect or Disconnect

 To disconnect VPN. Click on Lan / Wifi icon from system tray and click on "Connect or Disconnect"

23 Click on “Disconnect

Click on "Disconnect"

Having Trouble Connecting?
If you’re still unable to connect, then please check the most common errors and their solutions

Error 868
Solution

Error 800, 806, 807, 809
Solution

Error 720
Solution

Error 691
Solution

Error 647
Solution

How helpful did you find this answer?

Comments (0 )