Introducing PureSquare – for security beyond VPNs

Visit our website

Don’t worry about forgetting your passwords ever again with the all-new password manager. Try PureKeep

How to setup PureVPN PPTP on TotoLink Router

Feb 23, 2018
Mar 29, 2023
0 Comments
Download PDF
Order Now
Download PDF

Configuring a PureVPN tunnel on your router is a great way to ensure the safety and security of all the devices in your home. This method is especially beneficial if you have devices that don’t have VPN compatibility or you want to protect all the Wi-Fi-connected devices in your home.

Having a TotoLink router is quite easy to work with the VPN.  If you are not sure how to start, or where to begin with, here is what you need to do:

Things to Consider:

  1. You have a working internet connection
  2. VPN Supported Router.
  3. A Premium PureVPN account (If you haven’t bought yet click here to buy)
Find your VPN credentials for manual configuration.

To find your VPN credentials log into the PureVPN member area. Click 👉 here to visit member area.

  • Login to the Member area using your PureVPN registered email address and password.
  • On subscriptions tab scroll down to be able to view your VPN credentials.
  • You will be able to see and copy your VPN credentials.
  • Note down your PureVPN username and click on Eye icon to make your password visible and use it in the manual configuration.
How to connect PureVPN manually on TotoLink Router.
  1. Go to Network and then click on WAN Settings
  2. In the WAN type menu, choose PPTP/Dual WAN access PPTP
  3. Enter your PureVPN credentials. Here is how you can find your VPN credentials.
  4. Insert the desired server: Please refer to the server address shared below.
    1. Germany: de1.pointtoserver.com
    2. Netherlands: nl1.pointtoserver.com
    3. United Kingdom: ukl1.pointtoserver.com
    4. United States: usil1.pointtoserver.com
    5. United States: ustx1.pointtoserver.com
    6. United States: usca1.pointtoserver.com
    7. United States: usfl1.pointtoserver.com
    8. United States: usny1.pointtoserver.com
    9. United States: uswdc1.pointtoserver.com
    10. Australia: au-sd1.pointtoserver.com
  5. Check Enable MPPE Encryption and Enable MPPC compression
  6. Select DHCP client
  7. Select Set DNS Manually and add the following DNS servers:
  8. DNS1: 208.67.222.222
  9. DNS2: 208.67.220.220
  10. DNS3: 8.8.4.4
  11. Save the changes and Apply.
totolink vpn setup

Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.

How helpful did you find this answer?

Comments (0 )