Don’t worry about forgetting your passwords ever again with the all-new password manager. Try PureKeep
Configuring a PureVPN tunnel on your router is a great way to ensure the safety and security of all the devices in your home. This method is especially beneficial if you have devices that don’t have VPN compatibility or you want to protect all the Wi-Fi-connected devices in your home.
Comments (6 )
In order to get my 2860 to work I had to do just a few additions to the above:
1, Go into WAN -> General Setup and disable all the WANS except the one dialing out.
2, In the LAN-LAN VPN setup you also need to set ROUTE to NAT.
Setup as per instructions and set the computer to connect to vleu-am1.pointtoserver.com and everythings OK
We are sorry for the inconvenience. Can you kindly join us on 24/7 live chat so we may look into the issue in better way and assist you accordingly.
I have tried to set up a draytek 2830 modem router but, like the below comment, although it shows a valid connection on the lan to lan vpn page of the router I cant load any pages. The occasional google search result page but nothing heavier than that. Any thoughts?
Tried this configuration and whilst it looks like there is a VPN connection established, as soon as I try and route any traffic over the VPN nothing happens. Not sure if it’s a DNS issue or a IP config issue, but I have exactly the same config as the screenshots above.
I have a Virgin Media Hub in Modem Mode, if that helps?
We are sorry for the inconvenience. It would be easier for us to assist you if you can share your Router’s Wan settings screenshots with us.
Screenshots can be sent at [email protected]