Introducing PureSquare – for security beyond VPNs

Visit our website

Don’t worry about forgetting your passwords ever again with the all-new password manager. Try PureKeep

How to Setup PureVPN on Arris Router

Nov 01, 2018
Mar 28, 2023
0 Comments
Download PDF
Order Now
Download PDF

Configuring a PureVPN tunnel on your router is a great way to ensure the safety and security of all the devices in your home. This method is especially beneficial if you have devices that don’t have VPN compatibility or you want to protect all the Wi-Fi-connected devices in your home.


Things to Consider:

  1. You have a working internet connection.
  2. VPN Supported Router.
  3. A Premium PureVPN account (If you haven’t bought yet click here to buy).
Find your VPN credentials for manual configuration.

To find your VPN credentials log into the PureVPN member area. Click 👉 here to visit member area.

  • Login to the Member area using your PureVPN registered email address and password.
  • On subscriptions tab scroll down to be able to view your VPN credentials.
  • You will be able to see and copy your VPN credentials.
  • Note down your PureVPN username and click on Eye icon to make your password visible and use it in the manual configuration.
How to connect PureVPN manually on Arris Router.
  • This image shows how your VPN setup will look like this:
    1. Shows an Ethernet connection from the router to a computer.
    2. Shows a wireless connection from the router to the computer.
Arris-router-VPN-setup

In order to set up a PPTP connection on your Arris router, please access your router first.

Under WAN Setup, please change your Connection Type to PPTP.

  • Then select the following options:
  • Check Enable PPTP
  • Enter your PureVPN username and password
  • Enter your Server Address: (You may use one of the servers mentioned below)
    1. Germany: de1.pointtoserver.com
    2. Netherlands: nl1.pointtoserver.com
    3. United Kingdom: ukl1.pointtoserver.com
    4. United States: usil1.pointtoserver.com
    5. United States: ustx1.pointtoserver.com
    6. United States: usca1.pointtoserver.com
    7. United States: usfl1.pointtoserver.com
    8. United States: usny1.pointtoserver.com
    9. United States: uswdc1.pointtoserver.com
    10. Australia: au-sd1.pointtoserver.com
  • Enter My Internet IP: Get automatically from ISP. If there is no such setting, please skip it
  • For My IP Address: leave blank
  • My Subnet Mask: leave blank
  • Enable Idle Timeout
  • Idle timeout: 300
  • Enable Keep-alive
  • Keep-Alive: 30

Was this article helpful? Rate and share your comments below. Your input matters to us and everyone else in the Cyber Security Community.

How helpful did you find this answer?

Comments (0 )